<?xml version="1.0" encoding="gbk"?>
<rss version="2.0">
  <channel>
    <title>流体中文网 - 仿生流体与流固耦合</title>
    <link>http://cfluid.com/forum.php?mod=forumdisplay&amp;fid=20</link>
    <description>Latest 20 threads of 仿生流体与流固耦合</description>
    <copyright>Copyright(C) 流体中文网</copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Wed, 29 Apr 2026 14:49:44 +0000</lastBuildDate>
    <ttl>60</ttl>
    <image>
      <url>http://cfluid.com/static/image/common/logo_88_31.gif</url>
      <title>流体中文网</title>
      <link>http://cfluid.com/</link>
    </image>
    <item>
      <title>流固耦合，固体区域建模问题</title>
      <link>http://cfluid.com/forum.php?mod=viewthread&amp;tid=213075</link>
      <description><![CDATA[请教一下各位，流固耦合，有没有那种贴体网格的操作方法固体直接画网格，流体画网格，不用流体挖空固体，什么商业软件可以完成这个呢]]></description>
      <category>仿生流体与流固耦合</category>
      <author>苏淮南</author>
      <pubDate>Wed, 31 Jul 2019 04:00:34 +0000</pubDate>
    </item>
    <item>
      <title>求助VOF流体仿真建模</title>
      <link>http://cfluid.com/forum.php?mod=viewthread&amp;tid=213019</link>
      <description><![CDATA[请问一下外部导入的装配体壳体进行油液仿真，要不要进行油液建模呀？之前又看到一个液体晃动的实例，它是自有模型，我也看不出他有没有对液体进行建模，看只能看到壳体，然后定义了自由液面。如果不进行液体建模，如何对液体施加加速度呢？它是封闭的，是不是不用定义出 ...]]></description>
      <category>仿生流体与流固耦合</category>
      <author>huela</author>
      <pubDate>Mon, 10 Jun 2019 03:06:22 +0000</pubDate>
    </item>
    <item>
      <title>空化模型，有负压但无空化产生</title>
      <link>http://cfluid.com/forum.php?mod=viewthread&amp;tid=169040</link>
      <description><![CDATA[新手请求指教，最近做空化模拟，用Mixture模型，计算时有负压区，但是无空化产生，不知是什么原因，请高手不吝指教，谢谢！]]></description>
      <category>仿生流体与流固耦合</category>
      <author>清颜oo</author>
      <pubDate>Tue, 05 Dec 2017 03:12:30 +0000</pubDate>
    </item>
    <item>
      <title>FLUENT模拟流固两相流时出现计算问题，求大神指教</title>
      <link>http://cfluid.com/forum.php?mod=viewthread&amp;tid=165925</link>
      <description><![CDATA[我的问题主要是ICEM建立三维模型后，用纯水模拟了一下，出现结果后，进而加入固体颗粒进行模拟，可是不管我的边界条件如何改，松弛因子如何调整都不能计算，出现的错误显示是：Divergence detected in AMG solver: x-momentum。希望大家能给我个意见解决一下]]></description>
      <category>仿生流体与流固耦合</category>
      <author>jianhuawuli</author>
      <pubDate>Fri, 06 Jan 2017 11:29:18 +0000</pubDate>
    </item>
    <item>
      <title>推力测量</title>
      <link>http://cfluid.com/forum.php?mod=viewthread&amp;tid=150825</link>
      <description><![CDATA[推力测量]]></description>
      <category>仿生流体与流固耦合</category>
      <author>兰色深渊</author>
      <pubDate>Sat, 22 Oct 2016 04:41:46 +0000</pubDate>
    </item>
    <item>
      <title>仿生鱼尾鳍静态推力测量</title>
      <link>http://cfluid.com/forum.php?mod=viewthread&amp;tid=150817</link>
      <description><![CDATA[尾鳍推进效率确实远高于螺旋桨推进]]></description>
      <category>仿生流体与流固耦合</category>
      <author>兰色深渊</author>
      <pubDate>Thu, 20 Oct 2016 08:22:23 +0000</pubDate>
    </item>
    <item>
      <title>动网格加空化模型</title>
      <link>http://cfluid.com/forum.php?mod=viewthread&amp;tid=145767</link>
      <description><![CDATA[谁有动网格加空化模型的算例]]></description>
      <category>仿生流体与流固耦合</category>
      <author>张学伟</author>
      <pubDate>Sun, 29 Mar 2015 15:23:12 +0000</pubDate>
    </item>
    <item>
      <title>Fluent也能算得不错</title>
      <link>http://cfluid.com/forum.php?mod=viewthread&amp;tid=143328</link>
      <description><![CDATA[最近有个学生在使用我的程序，验证老算不对，他暗示我的程序有问题。我于是用我的程序算一个之前学生的博士论文，除了网格之外，边界条件、初始条件完全一样，竟然二者结果相当接近。由此看出，Fluent也是能够算得不错的结果。但从测试看，我们自己的程序在算例设置、计 ...]]></description>
      <category>仿生流体与流固耦合</category>
      <author>onesupeng</author>
      <pubDate>Fri, 03 Oct 2014 22:12:05 +0000</pubDate>
    </item>
    <item>
      <title>欢迎加入生物力学和生物流体QQ群</title>
      <link>http://cfluid.com/forum.php?mod=viewthread&amp;tid=140948</link>
      <description><![CDATA[群号: 337919311]]></description>
      <category>仿生流体与流固耦合</category>
      <author>onesupeng</author>
      <pubDate>Thu, 16 Jan 2014 00:39:48 +0000</pubDate>
    </item>
    <item>
      <title>单向流固耦合时候，怎么批处理加载瞬态流场中的压力结果</title>
      <link>http://cfluid.com/forum.php?mod=viewthread&amp;tid=126296</link>
      <description><![CDATA[最近在做泵的动应力叶轮模拟，瞬态的流场计算已经结束，我把泵转了15圈，每个时间步转2°，做流固耦合的时候，一般方法是将CFX计算结果加载进去，然后在static structural中的import pressure中加载CFX中的对应流固耦合面的压力场。但是如何CFX计算为稳态计算时，这个方 ...]]></description>
      <category>仿生流体与流固耦合</category>
      <author>flyzhuyue</author>
      <pubDate>Sun, 09 Jun 2013 06:00:00 +0000</pubDate>
    </item>
    <item>
      <title>求助 interior 和 interface</title>
      <link>http://cfluid.com/forum.php?mod=viewthread&amp;tid=126083</link>
      <description><![CDATA[interior 和 interface 究竟有什么区别呢？我现在算 两个固体接触导热，中间的边界条件 已知设置不好，求指点！]]></description>
      <category>仿生流体与流固耦合</category>
      <author>zaixiang</author>
      <pubDate>Wed, 29 May 2013 00:39:29 +0000</pubDate>
    </item>
    <item>
      <title>鱼游鸟飞数值模拟综述文章</title>
      <link>http://cfluid.com/forum.php?mod=viewthread&amp;tid=126013</link>
      <description><![CDATA[这是一个新的鱼游鸟飞数值模拟方面的综述文章，对于正在做这方面数值模拟的人有一定意义。

http://link.springer.com/article/10.1007/s00466-013-0875-2]]></description>
      <category>仿生流体与流固耦合</category>
      <author>onesupeng</author>
      <pubDate>Sat, 25 May 2013 11:45:34 +0000</pubDate>
    </item>
    <item>
      <title>求认识做发动机压气机或者涡轮流固耦合方向的童鞋</title>
      <link>http://cfluid.com/forum.php?mod=viewthread&amp;tid=125820</link>
      <description><![CDATA[大家好，我是北航研一的菜鸟，做发动机压气机或者涡轮的流固耦合方向，想认识相关童鞋，看到的请联系我，谢谢，qq814908430]]></description>
      <category>仿生流体与流固耦合</category>
      <author>北航何龙江</author>
      <pubDate>Thu, 16 May 2013 02:07:54 +0000</pubDate>
    </item>
    <item>
      <title>热冲压件工件的冷却模拟中，工件的边界条件该怎么设置呢？</title>
      <link>http://cfluid.com/forum.php?mod=viewthread&amp;tid=125785</link>
      <description><![CDATA[目的:看看不同冷却速度及冷却时间下，对热冲压件冷却速度的影响
入口流速：1m/s、3m/s、5m/s、7m/s、10m/s、20m/s、30m/s
保压时间：4s、6s、8s、10s、12s、15s、30s
工件初始温度：900℃      此时热扩散系数（α）（mm2.s-1）：5.761
原始模型比较复杂，先做了一 ...]]></description>
      <category>仿生流体与流固耦合</category>
      <author>manchat</author>
      <pubDate>Tue, 14 May 2013 13:11:38 +0000</pubDate>
    </item>
    <item>
      <title>LS PREPOST怎么用SPH 建模</title>
      <link>http://cfluid.com/forum.php?mod=viewthread&amp;tid=124677</link>
      <description><![CDATA[用SPH建立空气模型，与障碍物实施接触计算速度流场
但是sph粒子怎么赋予属性，
以下是提交计算式出现的错误（然后停止了）
SPH initialization
     Material number 2
     material type 148 is not implemented]]></description>
      <category>仿生流体与流固耦合</category>
      <author>tttruman</author>
      <pubDate>Tue, 30 Apr 2013 11:21:03 +0000</pubDate>
    </item>
    <item>
      <title>fluent中流固耦合</title>
      <link>http://cfluid.com/forum.php?mod=viewthread&amp;tid=124498</link>
      <description><![CDATA[在fluent中流固耦合分析，既有流体也有固体；在进行初始化出现这样的警告，请问是什么意思？哪里出现错误，谢谢]]></description>
      <category>仿生流体与流固耦合</category>
      <author>朝樱</author>
      <pubDate>Mon, 22 Apr 2013 06:35:06 +0000</pubDate>
    </item>
    <item>
      <title>关于fluent双向流固耦合中的interface问题</title>
      <link>http://cfluid.com/forum.php?mod=viewthread&amp;tid=124390</link>
      <description><![CDATA[我做的是旋转机械的流固耦合，使用的是ansys中fluent的双向流固耦合，就是使用system coupling进行的耦合计算，在平常fluent里面设置的相同mesh motion，设置转速和interface面复合。
但是的结果是叶轮的流体流不出去一直在里面，也就是说interface面没用。但是在fluen ...]]></description>
      <category>仿生流体与流固耦合</category>
      <author>lnyixing</author>
      <pubDate>Tue, 16 Apr 2013 15:38:30 +0000</pubDate>
    </item>
    <item>
      <title>求助：第一次发帖，关于时间步长与迭代时间</title>
      <link>http://cfluid.com/forum.php?mod=viewthread&amp;tid=124378</link>
      <description><![CDATA[小弟第一次发帖，也是第一次接触fluent。
 现在在做一个简单的3d模型的流固耦合的热分析，是一个工件在流动空气的中加热，温差十度左右的时候，热平衡所需的实际试验结果（非仿真）大概需要一两个小时。
 我的问题在于：fluent每步迭代所需要的时间大于设置的迭代步长 ...]]></description>
      <category>仿生流体与流固耦合</category>
      <author>zhangsy09</author>
      <pubDate>Tue, 16 Apr 2013 07:47:04 +0000</pubDate>
    </item>
    <item>
      <title>求传播波和倏逝波的科普</title>
      <link>http://cfluid.com/forum.php?mod=viewthread&amp;tid=124305</link>
      <description><![CDATA[民科大求声场中传播波和倏逝波的科普
哪位好心的大虾指点一二，推荐靠谱的专著、paper亦可]]></description>
      <category>仿生流体与流固耦合</category>
      <author>hawking2006</author>
      <pubDate>Sat, 13 Apr 2013 01:16:53 +0000</pubDate>
    </item>
    <item>
      <title>流固耦合问题</title>
      <link>http://cfluid.com/forum.php?mod=viewthread&amp;tid=124172</link>
      <description><![CDATA[各位高手，我现在想通过workbench中的流固耦合来实现一个新型水轮机叶片开阖过程的模拟，不知道能否实现？（模拟目的主要是得到叶片整个的开阖规律，类似于下图所示）]]></description>
      <category>仿生流体与流固耦合</category>
      <author>kglaohei</author>
      <pubDate>Mon, 08 Apr 2013 11:54:43 +0000</pubDate>
    </item>
  </channel>
</rss>