ICEM打开tin文件的时候出现了问题

5超7

我双击tin文件打开ICEM的时候，一开始会显示初始化错误（Inilization Error）的英语，然后下面出现
ICEM CFD 13.0
Error: Capability ICEM_AM does not exist in the ANSYS licensing pool.
The specified license path:
    ANSYSLI_SERVERS: 2325@Thinkpad-THINK
    FLEXlm Servers: 1055@Thinkpad-THINK
does not have any licenses for any product. Please make sure
the license server has been started correctly.


ICEM CFD 13.0 Initialization Error:
        failed to get ansys license 10019: return code 1, Capability ICEM_AM does not exist in the ANSYS licensing pool.
The specified license path:
    ANSYSLI_SERVERS: 2325@Thinkpad-THINK
    FLEXlm Servers: 1055@Thinkpad-THINK
does not have any licenses for any product. Please make sure
the license server has been started correctly.

You cannot use this function because a valid license for the mesh editor was not found.  Please make sure your license server is running and that you have a valid FEATURE or INCREMENT line for "aienv", "aimed", or "med".
Loading geometry file "D:/Ñо﾿Éúﾽ׶Î/}ﾶί/ﾰïÖú/icemcfdģÐÍÎļþ/two cyclines.tin"
Error opening file, D:/Ñо﾿Éúﾽ׶Î/}ﾶί/ﾰïÖú/icemcfdģÐÍÎļþ/two cyclines.tin
请问这该怎么解决？
我曾经用ICEM导入过step文件，以为可以用了，结果没想到还是出问题。。。

shuai_manlou

应该是license文件有问题，我之前也遇到过，完全卸载之后再重装就好了~~

5超7

一定要卸载吗？这安装很费时间的。。。

milaoshu

可以直接在那个license管理界面进行查看 有三项看是不是都working 不是的话点重启或者重新安装下license 不用完全卸载

qs_kun

你license有问题，或者服务没启动，手动启动一下试试。

seaharrier

license管理器启动一下试试

5超7

我在证书管理器下面点了一个选项，出来了这个界面，不知道接着该怎么办？请大家指导一下！麻烦大家了

5超7

难道需要卸了重新安装？

5超7

昨天晚上卸了又重新装了一遍，发现就fluent打不开，ICEM可以打开了，可以导入tin文件了，不知道是怎么回事

5超7

知道原因啦！在fluent启动界面出来的里面，show more options,更改一下里面的工作路径就可以了