马上注册,结交更多好友,享用更多功能,让你轻松玩转社区。
您需要 登录 才可以下载或查看,没有账号?注册
x
这是个中间空心的长方体上下各有两个圆柱体作为流体的进出口。我用TGrid方法对长方体可以网格,但对两个圆柱体不能网格。显示为:Error: A single edge loop formed by edge edge.1 on face face.1 must have at least 3 intervals. Error: Face face.1 of volume volume.1 could not be meshed. Error: Volume volume 1.could not be meshed without face(s) successfully meshed.
我尝试着只画一个圆柱体,但也不能对它网格,出现同样的错误。
但我看到北理工新出的fluent资料上有一个三维的例子,它也要对一个圆柱体划分体网格,用的也是TGrid。很郁闷,不知是不是我的gambit坏了,如果坏了,在哪可以找到呢?
请高手赐教!谢谢! |