|
马上注册,结交更多好友,享用更多功能,让你轻松玩转社区。
您需要 登录 才可以下载或查看,没有账号?注册
x
菱形按照2mm圆柱扫描,而后阵列得到如下网片。fluentmeshing划分网格显示自相交与拓扑失败(Error: 662 self-intersecting triangles exist in the model, which is above the limit for automatic smoothing ( 10 ).Either CAD plug-ins (instead of CAD readers) were used, which sometimes lead to a Multi-body-part topology, or Share Topology in SCDM/DM failed at certain locations. In the latter case, make sure to invoke Forced Share option in SCDM
Error Object: #f),是因为模型吗,还是操作有问题呢?有时候划分体网格总是出现(Error: Unresolved gaps have been detected at the indicated locations. To resolve these gaps, either close the gaps or refine the mesh.
Error Object: #f)这又是什么问题呢。请各位专家不吝赐教,感谢万分!
|
|