|
发表于 2003-11-10 13:06:01
|
显示全部楼层
请教phoenics大侠
好像很多人都在问这个问题,
你可以参见TR326,TR326里讲到了VR里面所有按钮的具体含义。比如:
Models - Energy Equation, Total/Static
By default, the Temperature form is set to 'Total', the enthalpy form to 'Static'. The static form includes the substantial derivative of the pressure and the kinetic heating terms in the energy conservation equation, the Total form does not.
If the flow is highly compressible (high Mach number) the Temperature form should be switched to 'Static' otherwise incorrect solutions will be obtained. The Enthalpy form can be used in 'Total' form as long as a suitable temperature derivation is selected in the properties panel.
|
|