you have not finished your grid generation work if you just have *.uns file. you need to output your grid from icemcfd to a file name "cfx5" that cfx5 can read. only if you have "cfx5" file then can you import it to cfx-pro and after many proceses you will create a gtm file and .def file.
IP卡
狗仔卡
发表于 2004-7-5 21:21:27
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
显身卡
楼主
