|
马上注册,结交更多好友,享用更多功能,让你轻松玩转社区。
您需要 登录 才可以下载或查看,没有账号?注册
x
小弟现在正在学ICEM.CFD,使用的版本是4.3
使用AUTOHEXA按照手册的步骤去做,在Generate mesh时出现如下信息,无法生成网格,不知道是什么地方出了问题,求大侠不吝赐教!!!!
Computing mesh
Writing grid input to file "D:/icemcfd_练习/tutorial-1/grid_input" ...
Running mesher...
Pid 1200: C:\Ansys\icemcfd\4.3-win\bin\auto_mesher.exe D:\icemcfd_练习\tutorial-1\grid_input D:\icemcfd_练习\tutorial-1\grid_output -errors D:\icemcfd_练习\tutorial-1\grid_errors -params D:\icemcfd_练习\tutorial-1\grid_params -temp_dir D:\icemcfd_练习\tutorial-1 -max_element 10000000
License check...
ICEM CFD Engineering license for automsh obtained
opened file D:/icemcfd_练习/tutorial-1/temp_node.0
opened file D:/icemcfd_练习/tutorial-1/temp_hex.0
opened file D:/icemcfd_练习/tutorial-1/temp_quad.0
unlinking D:/icemcfd_练习/tutorial-1/temp_node.0
unlinking D:/icemcfd_练习/tutorial-1/temp_hex.0
22903 real hexas
worst face alignment 0.424
5262 quads
unlinking D:/icemcfd_练习/tutorial-1/temp_quad.0
Done.
Error: the mesher did not create a valid mesh
Error: system error 22 opening file D:/icemcfd_练习/tutorial-1/grid_output
Loading mesh information ...
Error: the mesher did not create a valid mesh:
Error: system error 22 opening file D:/icemcfd_练习/tutorial-1/grid_output
|
|