Tecplot9.0（2）

chbo76

02-01.dat
----------------------------------------------------------------------
ZONE N=5, E=1, F=fepoint, ET=quadrilateral
0.0 1.0
1.0 1.0
3.0 1.0
0.0 0.0
1.0 0.0
1 2 5 4
|********************************************************************
* 02-01.dat中N=5是5个点,显示并将第1,2,5,4个点顺序连起来.  02-01.jpg
*********************************************************************
02-02.dat
----------------------------------------------------------------------
VARIABLES = "X", "Y", "", "T"
ZONE N=5, E=1, F=fepoint, ET=quadrilateral
0.0 1.0 100.0 1.6
1.0 1.0 150.0 1.5
3.0 1.0 300.0 2.0
0.0 0.0 50.0 1.0
1.0 0.0 100.0 1.4
1 2 5 4
|********************************************************************
* 在每个点是加上两个属性数据P和T. 点工具栏目里的Contour选择框,
* 选V3或者V4:T, 即02-02.jpg
*********************************************************************
02-03.dat
----------------------------------------------------------------------
TITLE = "Example: 2D Finite-Element Data"
VARIABLES = "X", "Y", "", "T"
ZONE N=8, E=4, F=FEPOINT, ET=QUADRILATERAL
0.0 1.0 100.0 1.6
1.0 1.0 150.0 1.5
3.0 1.0 300.0 2.0
0.0 0.0 50.0 1.0
1.0 0.0 100.0 1.4
3.0 0.0 200.0 2.2
4.0 0.0 400.0 3.0
2.0 2.0 280.0 1.9
1 2 5 4
2 3 6 5
6 7 3 3
3 2 8 8
|********************************************************************
* 增加到N=8即8个点,E=4即将第1-2-5-4 2-3-6-5 6-7-3-3 3-2-8-8点顺序连起来,
* 点工具栏目里的Contour选择框,选V3, 02-03.jpg
*********************************************************************
02-04.dat
----------------------------------------------------------------------
TITLE = "Example: 2D Finite-Element Data"
VARIABLES = "X", "Y", "", "T"
ZONE N=8, E=4, F=FEPOINT, ET=QUADRILATERAL
0.0 1.0 100.0 1.6
1.0 1.0 150.0 1.5
3.0 1.0 300.0 2.0
0.0 0.0 50.0 1.0
1.0 0.0 100.0 1.4
3.0 0.0 200.0 2.2
4.0 0.0 400.0 3.0
2.0 2.0 280.0 1.9
1 2 5 4
2 3 6 5
6 7 3 3
3 2 8 3
|********************************************************************
* 对比02-03.dat,只将最后一行数据改为3 2 8 3,可以发现三角形连线可以是这两种.
*  点工具栏目里的Contour选择框,选V3,02-04.jpg同02-03.jpg
*********************************************************************