Interface Type

yzhou130

[这个贴子最后由yzhou130在 2006/05/15 11:28pm 第 1 次编辑]

fluent的说明有一段话：Note that the grid interface must be positioned so that it has fluid cells on both sides. For example, the grid interface for the geometry shown in Figure  9.5.2 must lie in the fluid region between the rotor and stator; it cannot be on the edge of any part of the rotor or stator.
前面一段话的意识是grid interface两侧必须是流体，而coulped指的是e interface lies between a solid zone and a fluid zone这不是矛盾吗？