ANSYS 13.0正式推出了

周华

刚接到的信息，大家看一下：

Dear Valued Customer:

We are pleased to announce ANSYS 13.0, the newest release of our engineering simulation technology suite designed to optimize product development processes. Like product updates throughout the company's 40-year history, this release further reduces the time and cost needed to foster product innovations.

The advanced technology behind ANSYS 13.0 includes hundreds of new features that make it easier, faster and cheaper for users to bring new products to market, with a high degree of confidence in the ultimate results your organization will achieve. ANSYS 13.0 delivers new benefits in three major areas:


Greater fidelity via new solver methods. As engineering requirements and design complexity increase, simulation software must produce more accurate results that reflect changing operating conditions over time. ANSYS 13.0 features an electroic transient solver, large eddy simulation capability for fluids and structural 3-D rezoning, all of which produce higher-fidelity results in dynamic simulation environments. These are just a few new features, among others, that address fidelity in the release.


Higher productivity built on an adaptive architecture. ANSYS 13.0 software includes dozens of features that minimize the time and effort product development teams invest in simulation. For example, as product designs grow in size and complexity — and consideration of a single physics is no longer enough — ANSYS 13.0 makes it easier for users with different engineering specialties to work collaboratively to exchange data and develop real-world simulations.


Performance innovation via software and computational power. ANSYS 13.0 can provide speedup ratios that are dramatically greater than previous software releases. Complex multiphysics simulations can be accomplished more quickly and efficiently, speeding up product development and market launch initiatives.
As part of our commitment to Simulation Driven Product Development, we are excited to bring you ANSYS 13.0 software, which will be available for download later this year. We believe it will exceed your expectations and provide you considerable value in your development processes. We invite you to learn more about the upcoming release.

Regards,

Jim Cashman
President and CEO
ANSYS, Inc.

guoqing_xie

thanks  fou  your  introduction。  we  are  all  expecting  the  new   version   of   ansys.

莫口

支持一下！
真是强大的一个CAE帝国啊！

浪子轻狂

频繁升级，说明ansys目前的问题还是不少的。另外，升级也能再掏一下客户的腰包

geneme

fluent跟着升级不

周华

应该是跟着升级。最近安世亚太要开一个会，应该是专门要讲讲这个问题的。关于ANSYS的CFD到底向哪个方向发展在ANSYS刚刚购并FLUENT时是有过两种不同声音的，现在大概要有答案了。

通流

刚装上12.1，又升级了！唉！

浪子轻狂

如果你装的是盗版的暂时不用叹气，毕竟盗版的ansys13问世还有一段时间。如果你刚装上12.1，电驴上就发布13.0了，那是得叹口气，呵呵

geneme

12.1的下来还没装上呢 13就来了 唉

scorpiohu

去ansys公司网站看了一下
fluent改进还是挺多的，而且和cfx还应该是分开的，因为改进方面是分别介绍的。
湍流模型改进：对整个计算域，计算时可以局部采用LES，剩余的采用RANS。
还增加了sas湍流模型，scale-adapted simulation (SAS) turbulence model。（对湍流模型了解不深，字面翻译了一下。sas好像是说可以在一个模型环境下同时采用rans和les进行非定常求解）
还有就是好像可以进行multiple MRF计算，举了两个例子，一个是摇头风扇的模拟，一个是汽车在轮胎转动的情况下转弯的模拟。
大概看了一下，感兴趣的可以自己去看一下。
http://www.ansys.com/products/new-features/default.asp#3

uesoft

我觉得如果ANSYS、Fluent有象Matlab那样针对各行业的工具箱就好了，比如我想仿真变频空调，就有一个变频空调的工具箱，比如换热器、压缩机、电机的模型，很省事。如果我仿真一个风力机，就有一个现实的模型，修改参数就可以了。仿真一个电机冷却模型，直接用。仿真一个内燃机，就直接用内燃机模型，非常省事。Matlab即使不能这样，也能使用Simulink很快搭建一个模型。也许这功能已经有了，是我不了解ANSYS、Fluent。

[ 本帖最后由 uesoft 于 2010-10-31 20:23 编辑 ]

没什么不可一

不知CFX做磁流体有没有改进，要没有的话，还是不换了！哈哈！

莫口

这个已经有种子了，有人已经下载下来了……

浪子轻狂

盗版这么神速么？电驴上还没有呢

莫口

我也吃惊呢，今天一个群里就人安完了，说有4G多呢……
我上午也找到了一个种子，不知道能不能用
正下呢