|
马上注册,结交更多好友,享用更多功能,让你轻松玩转社区。
您需要 登录 才可以下载或查看,没有账号?注册
x
模型是一个长方形,入口边界条件设置的是:速度1.31m/s,压力为10Pa,但是在初始化时出现下面的提示,不知道是为什么,请教大神
Checking case topology...
-This case has both inlets & outlets
-Pressure information is not available at the boundaries.
Case will be initialized with constant pressure
|
|